Protective Coating 083338 Wood Epoxy Paste 6 Ounce Pc Woody
Alternate Warehouse
- Buy 12 for $15.80 each and save 25%
Key Features
- Repair window sills or frames for property maintenance or restoration
- Repair and fill damaged dormitory or apartment door
- Repair damaged pressure treated wood rail for home, golf course or resort
- Fill and cap wooden piles or columns of condominium complex
- Replace and fill knots and checks in floor
Wood epoxy paste interior/exterior waterproof - paintable"p.c. Woody" pine/tan - 1 to 1 mix ratio - can size 6 ounces Replace missing/rotted wood with structural strength greater than most wood. Permanently repair window sills, frames, cornish, furniture, decking; rebuild missing wood; bridge or reinforce larger holes with screen wire or wood blocks. 30-40 minute working time. 90 minutes tack free, overnight for service, 1 week max cure time at 70 degrees Fahrenheit. After cure work and tool like real wood. Contains real wood pieces. Resistant to weather elements, mildew, dry rot, UV light, fresh and salt water, and chem icals present in pressure treated wood. No vise or clamp needed for most applications. Will not drip or sag when applied to flat, vertical or overhead surfaces. 850 psi tensile shear strength. 50-55 hardness shore D after 1 week of curing.Stainable.
PC-WOODY? (r) is a two-part epoxy paste that is excellent for filling cavities in wood. Make permanent repairs without shrinking, cracking or popping out of exterior wood. Sand, drill, nail, prime and paint or stain. Bonding filler for replacement wood. Not brittle. Replace missing/rotted wood with structural strength greater than most wood. Permanently repair window sills, frames, cornish, furniture, decking; rebuild missing wood; bridge or reinforce larger holes with screen wire or wood blocks. 30-40 minute working time. 90 minutes tack free, overnight for service, 1 week max cure time at 70 degrees Fahrenheit. After cure work and tool like real wood. Contains real wood pieces. Resistant to weather elements, mildew, dry rot, UV light, fresh and salt water, and chem icals present in pressure treated wood. No vise or clamp needed for most applications. Will not drip or sag when applied to flat, vertical or overhead surfaces. 850 psi tensile shear strength. 50-55 hardness shore D after 1 week of curing. Stainable.