Oregon M66 Micro-Lite Chainsaw Chain, 16 Inch Length Bar, 0.05 Gauge, 0.325 Inch Threads Per Inch/Pitch, 66-Link
- Buy 3 for $22.50 each and save 21%
- Buy 12 for $22.24 each and save 22%
Key Features
- LubriTec (tm) keeps your chain and guide bar oiled for less friction and longer life
- Blued cutters deliver high-quality protection against corrosion
- Expanded top-plate filing Indicators and depth gauge filing indicators area make accurate sharpening easier
- Always use a SpeedCut (tm) narrow kerf chain in combination with SpeedCut or other narrow kerf bars
- For saw sizes 38 to 55 cc
- Exclusive OCS-01 steel provides greater durability
Chainsaw cutting chains low kickback - narrow kerf "micro-lite" 0.325 pitch - 0.050 gauge 95VP length 16 link count=66. Reduced-kickback, general purpose chain for most types of cutting. Primarily intended commercial woodcutters or for occasional use, but can also be used by professional cutters who prefer .325 inches pitch saws. Intended for saws from 2.2 - 2.8 cubic inches, an d with bars from 13 inches - 20 inches. For use only with narrow kerf design bars. Fits the Husqvarna brand saws. Meets the low kickback performance requirements of ANSI B175.1 when tested with Oregon Micro-Lite bars on certain saws, and may not meet the low kickback requirements when used with other saws or bars.
Reduced-kickback, general purpose chain for most types of cutting. Primarily intended commercial woodcutters or for occasional use, but can also be used by professional cutters who prefer. 325 inches pitch saws. Intended for saws from 2.2 - 2.8 cubic inches, an d with bars from 13 inches - 20 inches. For use only with narrow kerf design bars. Fits the Husqvarna brand saws. Meets the low kickback performance requirements of ANSI B175.1 when tested with Oregon Micro-Lite bars on certain saws, and may not meet the low kickback requirements when used with other saws or bars.