Wayne CWS50 1/2 Horsepower Deep Well Jet Pump
Rapid Ship
Key Features
- Dual voltage (120/240 V) high efficiency square flange motor (factory set for 240 V)
- Pressure switch is pre-set at 30-50 psi for automatic operation
- Durable cast iron volute with dedicated priming port for volute filling
- For wells 0 - 90 ft in depth
- Jet assembly required
Jet pumps square flange capacitor start - overload protected factory wired for 240 v, 3450 rpm - 348 gph at 5 feet hp=1/2 voltage=120 JETS SOLD SEPARATELY. Square flange deep well jet pumps, provide the same dependable operation as integral jet pumps, with the added benefit of a square flange motor. This motor is universally available if replacement is ever required. Capable of lifting water from 0-90 feet. Factory wired for 240V. 3,450 RPM, capacitor for start, overload protected. ONE YEAR WARRANTY - Features rubber gaskets, resilient rubber ring seals water housing against any leakage. Water housing has been improved with large channe ls, delivering more water volume at high pressure. The 30-50 PSI automatic pressure switch provides required household pressure by switching pump on and off automatically. Copper tubing provides for no corrosion or cracking. Priming port prr 1 or 2 people (small) lift required 0 feet - 10 feet, 1/2 HP for 2 to 4 people (medium) 10 feet - 20 feet, 1HP over 4 people (large) 15 feet - 25 feet. 3/4 inches NPT discharge with 1- 1/4 inches suction and 1 inch drive.
Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A built-in control valve is available on deep well pumps. Deep well pumps can be mounted to either a pre-charged, conventional type or free- standing pressure tank. 1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240 V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately).