UGL 32907 Zar Ultra Interior Oil Base Polyurethane Satin Spray
Rapid Ship
Minimum Purchase Quantity (per order): 1
Shipping Surcharge (any quantity): $0.00
- Buy 6 for $12.70 each and save 22%
- Buy 24 for $12.54 each and save 23%
Key Features
- For interior use only
- Tough abrasion-resistant finish
- Smooth, self-leveling formula
- Great for floors dries in 2 hrs
Ultra Interior Oil Base Polyurethane Satin Spray. 11 Ounce Spray Can Application. For use on hardwood floors, cabinets, furniture, bartops, wood countertops, wall paneling and woodwork. For best results apply when air and surface temperatures are between 65 and 85 degrees Farenheit. ZAR ULTRA 11 ounce spray cans should be shaken vigrously before and during application, except ZAR ULTRA Gloss Spray Polyurethane. Practice on scrap wood to establish proper spray technique. Hold container 10 to 12 inches from surface. Apply light, even strokes. If bubbles or runs occur, wipe clean with paint thinner or mineral spirits. Allow each coat to dry at least 2 hours. Drying time may vary due to temperature and humidity. Sand lightly. (Do not sand fiberglass or wood grained metal surfaces.) Remove sanding dust with a tack cloth or a clean rag dampned with mineral spirtis. Reapply. Apply minimum of 3 coats. Allow final coat to dry 4 to 6 hours. Areas with harsh exposure to sun, weather or foot traffic will show wear more quickly than other surfaces. If this occurs, clean affected areas and recoat as necessary.