UGL 32807 Ultra Interior Oil Base Polyurethane Gloss Spray

Key Features

• For interior use only
• Tough abrasion-resistant finish
• Smooth, self-leveling formula
• Great for floors dries in 2 hrs

Ultra Interior Oil Base Polyurethane Gloss Spray. 11 Ounce Spray Can Application. For use on hardwood floors, cabinets, furniture, bartops, wood countertops, wall paneling and woodwork. For best results apply when air and surface temperatures are between 65 and 85 degrees Farenheit. ZAR ULTRA 11 ounce spray cans should be shaken vigrously before and during application, except ZAR ULTRA Gloss Spray Polyurethane. Practice on scrap wood to establish proper spray technique. Hold container 10 to 12 inches from surface. Apply light, even strokes. If bubbles or runs occur, wipe clean with paint thinner or mineral spirits. Allow each coat to dry at least 2 hours. Drying time may vary due to temperature and humidity. Sand lightly. (Do not sand fiberglass or wood grained metal surfaces.) Remove sanding dust with a tack cloth or a clean rag dampned with mineral spirtis. Reapply. Apply minimum of 3 coats. Allow final coat to dry 4 to 6 hours. Areas with harsh exposure to sun, weather or foot traffic will show wear more quickly than other surfaces. If this occurs, clean affected areas and recoat as necessary.

ZAR ULTRA polyurethane is an incredibly fast-drying, oil-based polyurethane that dries to a smooth finish on bare wood, in just 2 hrs, with no brush marks. Featuring a tough, abrasion-resistant finish and self-leveling properties, it works beautifully on hardwood floors, cabinets, furniture and woodwork. For use on hardwood floors, cabinets, furniture, bartops, wooden countertops, wall paneling, and woodwork. Abrasion resistant finish. Smooth self-leveling formula. Cleans up with paint or mineral spirits. Dries in two hours on bare wood.