Tuthill FR701V Fill Rite Fuel Pump And Meter 115 Volts Ac Heavy Duty
Rapid Ship
Shipping Surcharge (any quantity): $20.00
Key Features
- 2 in threaded base for tank mounting
- Iron rotor with carbon rotary vanes
- Self priming
Fuel transfer pumps rotary vane - heavy-duty ac-powered - series 700b"fill-rite" 14 inches width x 11 inch height x 14 inches depth max gpm flow rate=20 max psi outlet=20 Rugged, lightweight, positive displacement, direct drive pump compatible with diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. Diesel fuel maximum recommended pumped fluid viscosity. Offers heavy-duty switch and built-in check, bypass, an d pressure-relief valves. Ball bearing construction; no greasing or oiling required. Thermal overload protector. Pump security-equipped for padlocking. Furnished with tank adapter for skid tank mounting, pedestals for island installations sold separately. Able to direct mount to above ground tank. Complete with UL Listed 3/4 inches x 12 feet long hose, manual nozzle, and No.807C flow meter installed. 150 to -15 degrees Fahrenheit max to min ambient operating temp. 12 inches of mercury min dry vac, 10 feet mingas/ 15 feet min diesel suction lift. 1 inch female NPT on suction pipe/ 2 inches male NPT on bung inlet, 3/4 inches NPT outlet. Full 1/3 HP 115 volt AC/60Hz explosion-proof motor. 5.5 amp, 1725 RPM. Delivers up to 20 GPM. 14 inches width x 11 inch height x 14 inches depth. CSA and CUL/UL Lis ted.
115V AC, 20 gpm heavy-duty, cast-iron, rotary vane fuel transfer pump. Designed for gasoline, diesel, biodiesel up to B20, E15, kerosene and mineral spirits. Includes pump, 3/4 in x 12 ft hose with static wire, 1 manual nozzle and three-digit resettable mechanical meter. UL/cUL, ATEX, CE. Two year warranty. Made in USA. Rugged, positive displacement, direct drive pump compatible with diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. Diesel fuel maximum recommended pumped fluid viscosity. Offers heavy-duty switch and built-in check and bypass valves. Ball bearing construction; no greasing or oiling required. Thermal overload protector. Pump security-equipped for padlocking. Furnished with tank adapter for skid tank mounting, pedestals for island installations sold separately. Able to direct mount to above ground tank. Complete with UL Listed 3/4" x 12 feet long hose, manual nozzle, and 807C flow meter installed. 150 to -15 degrees Fahrenheit max to min ambient operating temp. 12 inches of mercury min dry vac, 10 feet min gas/ 15 feet min diesel suction lift. 1 -1/4" female NPT on suction pipe/ 2 inches male NPT on bung inlet, 3/4" NPT outlet. Full 1/3 HP 115 volt AC/60Hz explosion-proof motor. 5.5 amp, 1725 RPM. Delivers up to 15 GPM. 14 inches width x 11 inches height x 14 inches depth. CSA and cUL/UL Listed.