Tie Down Engineering 59125L Patio Anchor With Expansion Bolt 5/8 Inch By 3 Inch (Case of 24)
Rapid Ship
Designed to be bolted to an expansion sleeve in an existing concrete slab or footing with only a 5/8 in drilled hole for expansion anchor bolt. Concrete must be 2500 psi minimum slab with 4 in minimum thickness and 6/6 x 10/10 wire mesh or fiber mesh installed. Concrete slab must allow 4725 pounds of vertical tension on anchor without lifting. This assumes that the concrete weighs 150 pounds /cu-ft. Minimum distance from the anchor shaft to one edge of the slab is 4 in from one edge and 6 in from any other edge. Black color. Designed to be bolted to an expansion sleeve in an existing concrete slab or footing with only a 5/8" drilled hole for expansion anchor bolt. Concrete must be 2500 PSI minimum slab with 4 inches minimum thickness and 6/6 x 10/10 wire mesh or fiber mesh installe d. Concrete slab must allow 4725 pounds of vertical tension on anchor without lifting. This assumes that the concrete weighs 150 pounds per cubic foot. Minimum distance from the anchor shaft to one edge of the slab is 4 inches from one edge and 6 inches from any other edge. Black color.