Halo 11888778 Light Housing, 6 in Dia Recessed Can, Aluminum
Rapid Ship
- Buy 6 for $20.00 each and save 20%
- Buy 24 for $19.84 each and save 21%
Key Features
- Die-formed housing
- Remodel springs accommodate 1/2 in and 5/8 in ceiling material
- Openings are gasketed for AIR-TITE (tm) (tm) installation and can be used in 2 in x 8 in joist construction
- Seven 1/2 in trade size conduit knockouts with true pryout slots
- Slide-N-Side (tm) wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts
- Accepts a wide range of non-metallic (type NM) sheathed cables, the standard cable types used in lighting in both US and Canada
- Connection is rated for 120 and 277 V input, installer must verify LED module voltage is compatible with the applicable voltage input
Recessed light fixtures led remodel housing h750ricat size 6 inches For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum ho using. Installs from below the ceiling in 1/2 inches or 5/8 inches ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13- 1/4 inches length x 6- 7/8 inches width x 7- 1/2 inches height. Ceil ing cutout: Match template supplied with housing - 6- 1/4 inches typical.
The H750RICAT is a dedicated LED Remodel housing for use with Halo H7 Collection 600 900 Series LED modules. The H750RICAT is designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE??? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750RICAT LED connector system provides high efficiency code compliance when used with Halo H7 Collection 600 and 900 Series LED modules. For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum ho using. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceil ing cutout: Match template supplied with housing - 6-1/4" typical.