Titebond 6221 Instant Bond Wood Adhesive Thick 2 Ounce

Key Features

• Fast set, eliminates clamping or reduces clamp time
• Bonds stronger than wood
• Excellent heat and solvent resistance
• Unaffected by finishes
• Triple distilled for purity and consistency
• Impact-resistant
• No-clog applicator for easy use and waste reduction
• Ideal for bonding miter joints on MDF and porous woods

Wood adhesive instant bond interior - thick viscosity size 2 ounces An applicator must be applied to the surface before using this item. See SKU # 290.4241 for applicator. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp and bonding end-grain in a miter joint a pplication, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 1500 cps viscosity offe rs an assembly time of 10 seconds and an initial cure speed of 8 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 3. Between 2800 and 4200 psi shear strength at room temperature dependingon substrate tested.

Titebond instant bond is a two-part bonding system that takes between 5 to 15 sec to set and 30 to 60 sec for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Titebond instant bond thick viscosity product offers an assembly time of 10 sec and an initial cure speed of 8 sec. It is ideal for bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use. An activator must be applied to the surface before using this item. See SKU # 290.4241 for activator. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp and bonding end-grain in a miter joint app lication, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 1500 cps viscosity offers an assembly time of 10 seconds and an initial cure speed of 8 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 3. Between 2800 and 4200 psi shear strength at room temperature depending o n substrate tested.