Fehr Brothers 7/8 7/8 Inch Screw Pin Anchor Shackle

Anchor shackles screw pin imported galvanized size 7/8 inches wll tons=4-1/4 Forged steel, hot dipped, galvanized. Openthroat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets federal specification rrc271b, type iv, class 1. Warning: Inspect regularly. Replace if worn, distorted or damaged.ensure pin is fully engaged. Seize pin with wire. Do not exceed wll [work load limit].use only duty rated shackles, with embossed wll,for overhead lifting.

Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2. WARNING: Inspe ct regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.