Cutler Hammer DPU222RP Non Fusible AC Disconnect Switch
Rapid Ship
Key Features
- On/Off control provided by a pullout handle
- Pullout handle can be stored in the OFF position, helping to prevent misplacement
- Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
Ac disconnect switches type 3r - non-fusible - outdoor rainproof - 5-3/8 inches by 8-3/4 inches by 3-1/8 inches -60 amp rating Single phase, 2 pole, 2 wire, 240 volt ac, galvanized steel enclosure with molded case switch. Rated 3 hp at 120 volt, 10 hp at 240 volt. For bottom entry and exit only. Heavy duty, high strength enclosure with welded and riveted construction. Swing-up cover remains in place when in open position, and includes provision for padlocking. 10,000 air. When pullout is in off position, protective shield can be removed for access to fuses. No.gb4 ground bar and no.96-3258-4 pullout head replacement sold separately. #14-3 awg wire range. 5-3/8 inches by 8-3/4 inches by 3-1/8 inches. Ul listed file no.e5239.
An air conditioning disconnect (ACD) is a disconnect located between the load center and the air conditioner. Eaton's ACD provides an installer or repair personnel with a visible disconnecting means when performing maintenance. Single phase, 2 pole, 2 wire, 240 volt AC, galvanized steel enclosure with molded case switch. Rated 3 HP at 120 volt, 10 HP at 240 volt. For bottom entry and exit only. Heavy duty, high strength enclosure with welded and riveted construction. Swing-up co ver remains in place when in open position, and includes provision for padlocking. 10,000 AIR. When pullout is in off position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.96-3258-4 pullout head replacement sold separate ly. #14-3 AWG wire range. 5-3/8" x 8-3/4" x 3-1/8". UL Listed file No.E5239.