Belwith 1010 First Watch Security Security Strike 1-1/4 By 3-5/8 Inch Brass

1-1/4 x 3-5/8 inch brass, brass plated steel security strike, replaces most deadbolt strikes for increased security, 3 inch screws to attach to wall stud.

Instructions:1. Remove old strike.2. Position new strike in place and mark the two mounting holes on the side of the strike away from the door jamb. Chisel out area behind strike if needed or if a flush fit is desired.3. Drill 1/8″ pilot holes 1″ deep. Install small screws.4. Close door and operate lock. If lock operates correctly, drill remaining two pilot holes with a 1/8″ drill bit 2″ deep. Install long screws. If lock does not operate correctly, reposition strike plate and retest.