Gallon Wolman Raincoat One Coat Clear Sealer is a clear oil-based exterior water repellant designed to provide protection against water damage, including splitting and warping caused by water absorption as well asd mildew. Raincoat One Coat Clear Sealer formula is colorless which allows the wood's original color and grain to show through while protecting the surface from water damage. Unlike other water-base sealers that require wood to be weathered for months, Raincoat One Coat Clear Sealer can be applied immediately to newly installed wood to stop rain and other precipitation from damaging wood. Use as a final finish or water repellent primer under an oil-base paint or stain. The NeverWet hydrophobic technology properties and superior water repellency helps maximize resistance to wood cracking, checking, splitting and warping. Use raincoat one coat clear sealer to beautify and protect decks, porches, fences, shake, shingle and clapboard siding, boat decks, boardwalks, outdoor furniture, gazebos, arbors and trellises, storage sheds and more. Ready for use in 48 hours. Mildew resistant coating. For best results preparation is key to any wolman stain or finish adhering properly. To properly prepare your surface use either the wolman deckstrip or deckstrip asr then clean with wolman deckbrite or deck & fence brightener. For application use a quality 3/8 inch nap roller, short nap stain pad, synthetic paint brush or a pump style sprayer. Coverage is up to 250 square feet per gallon with one coat.
See similar products in our Exterior Clear Protector Water Repellant Finishes department.