Tuthill FR1210H Fill Rite 12 Volt 14 Gpm Fuel Transfer Pump
Rapid Ship
Key Features
- Cast bronze rotor with bronze rotary vanes
- Built-in strainer
- Replaces FR1210C
- 2 in threaded base for tank mounting
Fuel transfer pumps rotary vane - heavy-duty dc powered - series 1200c"fill-rite" 12-1/4 inches w x 9 inches h x 9 inches d max gpm flow rate=13 max psi outlet=12 Weighs less than 27 pounds, with hose and nozzle. Draw is easy on the DC power source. Compatible with petro products of all types including diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. 2 inches threaded base for tank openings. Integral che ck, automatic bypass and thermal-relief valves, and built-in strainer (inlet screen). No foot valve or lubrication required. Offers corrosion-proof adjustable section pipe, iron rotor, machined carbon vanes, heavy-duty switch, thermal overload protector a nd junction box. Pump security equipped for padlocking. Basic 12 volt DC pump, 15 feet long heavy-duty 3 wire battery cable, manual nozzle with nozzle boot that protects against dirt and contamination, telescoping suction pipe, and UL Listed 3/4 inches x 12 feet long hose with static ground wire. 2 inches male NPT on bung adapter/ 1 inch female NPT on suction port inlets; 3/4 inches female NPT outlet. Explosion-proof 1/4 HP 12 volt DC/20 amp, 2600 RPM motor with permanent magnet and sealed ball bearings. 30 minute duty c ycle, not for continuous operation. Delivers up to 15 GPM. 12- 1/4 inches width x 9 inches height x 9 inches depth. CSA approved, CUL/UL Listed pump and motor, and bears CE marking.
12 VDC, 15 gpm heavy-duty, cast-iron, rotary vane fuel transfer pump. Designed for gasoline, diesel, biodiesel up to B20, E15, kerosene and mineral spirits. Includes pump, 3/4 in manual nozzle, 3/4 in x 12 in hose with static ground wire, 18 ft battery cable and 20 in to 34 in steel telescoping suction pipe. UL/cUL, ATEX, CE motor. Two year warranty. Made in USA. Weighs less than 27 pounds, with hose and nozzle. Draw is easy on the DC power source. Compatible with petro products of all types including diesel, gasoline, kerosene and Biodiesel to B20. 2 inches threaded base for tank openings. Integral check and automatic bypass valves, and built-in strainer (inlet screen). No foot valve or lubrication required. Offers corrosion-proof adjustable suction pipe, iron rotor, machined carbon vanes, heavy-duty switch, thermal overload protector and junction box. Pump security eq uipped for padlocking. Heavy-duty 12 volt DC pump, 15 feet long heavy-duty 3 wire battery cable, manual nozzle with nozzle boot that protects against dirt and contamination, telescoping suction pipe, and UL Listed 3/4" x 12 feet long hose with stat ic ground wire. 2 inches male NPT on bung adapter/ 1 inch female NPT on suction port inlets; 3/4" female NPT outlet. Explosion-proof 1/4 HP 12 volt DC/20 amp, 2600 RPM motor with permanent magnet and sealed ball bearings. 30 minute duty cycle, not for continuous ope ration. Delivers up to 15 GPM. 12-1/4" width x 9 inches height x 9 inches depth. CSA approved, cUL/UL Listed pump and motor, and bears CE marking.