Entrance handlesets two piece - f series triple option universal latchbolt plymouth interior knob with single cylinder deadbolt - visual pack finish=u bright brass handed=- For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the bright brass finish which has a bright brass finish on all interior parts and ultima lifetime anti-tarnish finish on all exterior parts. Door prep: 1-1/2 inch or 2-1/8 inch deadbolt and 2-1/8 inch latchbolt crossbore; 7/8 inch or 1 inch edge bore; 1 inch x 2-1/4 inchlatch faces; 4 inch ctc. Door thickness: 1-5/8 inch to 1-3/4 inch; packed with extra mounting screws to accommodate 2 inch doors. Cylinder: 5-pin with nickel silver pins and keys (2). Faceplates: 1 inch x 2-1/4 inch. Strikes: Deadbolt - 1-1/8 inch x 2-3/4 inch, square corner, no lip, dust box and door frame reinforcer; latchbolt - 1-5/8 inch x 2-1/4 inch full lip. Bolt: Maximum security b300 single cylinder or b362 double cylinder deadbolt with 7/8 inch housing diameter, 1 inch throw. Ansi/bhma: Grade 1 security features. Triple option universal: Both handleset and deadbolt fit all doors, 2-3/8 inch or 2-3/4 inch backset; square corner, round corner, or drive-in preps.
- 4 in minimum center to center door prep required for this two piece model
- Interior half only
- Must be ordered right handed or left handed
- Requires F358 or FA358 to complete handle set
See similar products in our Handlesets Complete Schlage department.