Fluorescent recessed troffers lay-in suspended ceiling et series 48 inch by 3 3/4 inch by 23 7/8 inch use lamps=(2) f32t8 48 inch
Designed to be recessed in a t-bar grid ceiling, features a hinged door with a latch system to allow easy maintenance. Flush mount. Housing, cover, ends, and door frame are die formed of 22 gauge cold rolled steel. Housing has reinforced ribs for extra ri gidity and rounded side flanges for safety. Ends have built-in earthquake clips for t-grid attachment and corners have tie holes for safety wire attachment. Ballast cover and wiring access plate snap on and off for installation. 1-piece clear acrylic diff user with diamond prismatic pattern on one side. Thickness is .100". Lens is secured inside the door frame channel on all four sides, and the door frame hinges and latches into the housing. Wired with u.L. Listed electronic, normal power fa
Or, Rapid start, Class P, full light output ballast for 120 volt, 60 hertz AC operation. 50 degrees F minimum starting temperature. Lampholders are rotating lock, use T8 medium bi-pin lamps. U.L. Listed dry location for consumer use. Fixture can be mounte d individually or in continuous runs. All parts, interior and exterior, are finished in lighting grade white baked gloss enamel paint. |
