Cutler Hammer BRP12L200R 200 Amp Main Lug Load Center

Key Features

• Optimized knockouts - optimized knockout locations for additional access, easier to remove
• Smooth case edges - providing a more professional look and feel
• 2/0 lug- easily removable and can be installed in any location on the neutral bar
• Inboard neutral - increases gutter space to allow for professional installation of conductors
• Common drive types (BR)- minimizes number of tools required for installation as the neutral bar and BR breaker screws will share a common drive type
• Backed out neutral screws - allows for quick connection of neutral and ground conductors
• Plug-on neutral (PON) - eliminates the pigtail connection providing time and labor savings
• Embossed circuit numbers-durable circuit numbering with added marking for twin breakers

Main lug loadcenters br type - residential - top feed outdoor - nema 3r - g60 b2r box 14-5/16 inches width by 18-3/4 inches height by 5-3/16 inches depth - 200 amp rating Rainproof galvanized steel enclosure. Single phase, 3 wire, insulated/bondable split neutral, 12 ( 1 inch ) spaces 24 poles, 120/240 volt ac. Has notch for no.brhdk125 hold down kit. With closure plates, hubs and ground bar kits (necessary for sub-feeding) sold separately. Tin-plated aluminum bus bar. In accordance with nec, suitable for use as service equipment when not more than 6 main disconnecting means are provided and when not used as lighting and appliance panelboard. Twin neutral with non-removable cross bus. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #1 - 300 kcmil wire. Electrostatic powder coat, baked urethane painted. B2r box 14-5/16 inch by 18-3/4 inch by 5-3/16 inch. Ul listed file e52977.

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. Rainproof galvanized steel enclosure. Single phase, 3 wire, insulated/bondable split neutral, 12 ( 1 inch ) spaces 24 poles, 120/240 volt AC. Has notch for No.BRHDK125 hold down kit. With closure plates, hubs and ground bar kits (necessary for sub-feeding) sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 6 main disconnecting means are provided and when not used as lighting and appliance panelboard. Twin neutral with non-removable cros s bus. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #1 - 300 kcmil wire. Electrostatic powder coat, baked urethane painted. B2R box 14-5/16" x 18-3/4" x 5-3/16". UL Lis ted file E52977.