Recessed light fixtures allslope ic airtite housing"halo" 6 inches downlight Designed for sloped ceiling installations for ceilings from 2/12 to 12/12 pitch. The socket mechanism allows the lamp to be aimed straight down regardless of ceiling pitch. Lamp socket and trim can be adjusted 20 degrees laterally for compound slope ceili ngs or to compensate for off axis aiming. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2 inches knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hangerbars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24 inches joist span. Can be field shortened for 12 inches joist. Installation: 7- 3/8 inches height allows use in 2 x 8 joist c onstruction. Housing accommodates ceilings up to 1- 1/4 inches thick. Requires 6- 1/2 inches ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
- Die-formed housing and plaster frame
- Got nail bar hangers
- Pass-N-Thru tool-less shortening of bar hangers
- Quick Connect wiring connectors included in junction box
- Slide-N-Side wire traps
- Slope indicator provides quick and consistent lamp settings
- Socket aiming for ceilings from 2/12 to 12/12 pitch
- Thermally protected
See similar products in our Recessed Light Kit department.